品名：鎂鋁用半合成切削液

型號：SGR2328

技術指標：

性能用途：

不僅適用于鑄鐵、碳鋼、合金鋼等黑色金屬，還適用于鎂鋁合金有色金屬，特別是鑄鋁件的加工。

產品特點：

該產品具有優異的防銹性、潤滑性、清洗性，抑菌性，對鑄鋁件有較好的防銹性等特點。

使用方法：

①推薦一般使用濃度：原液與水按1:20使用。

②使用（更換）新液時，應先將貯液箱（槽）及機床工作臺、裝夾具、鐵屑及污物清洗干凈。

③槽液的補充：當槽液需要補充時，加水的同時加入相應比例的本品原液，保持必須的濃度。

④工作液應保持清潔和通風，及時清除金屬屑和浮油等雜質。

⑤禁止與其他品牌切削液混用。

包裝貯存：

①本品應貯存于干燥、陰涼通風庫房?jī)?nèi)，貯運過程中應避免日曬、雨淋。

②18L/桶、200L/桶或根據客戶需求。安全防護：

操作時注意勞動保護，應避免與皮膚、眼睛等接觸，接觸后用大量清水沖洗。

Universal semi-synthetic cutting fluid SGR2328

Product Features：

◇ SGR2328 is a water-soluble cutting fluid, which is mixed with water to form a translucent liquid, with good lubrication and rust prevention. The working fluid can extend the corrosion inhibition time effectively between processes under complex conditions.

◇SGR2328 has good versatility and can be applied to the processing of most ferrous metals, aluminum alloys, copper and other non-ferrous metals.

◇SGR2328 exhibits superior lubrication and cooling characteristics, along with exceptional machining performance.

◇SGR2328 can extend the tool life, ensure the workpiece surface machining accuracy effectively.

    Product parameters：

Range of application:

◇SGR2328  is suitable for the processing of cast iron, carbon steel, stainless steel and most of the ferrous metal, aluminum alloy, copper and other non-ferrous metal.It can be used for anti -rust,lubrication, cooling, and cleaning between workpiece process.

Application method:

◇ After cleaning the liquid tank and the machine tool, the SGR2328 is mixed with water in a certain proportion according to the on-site process requirements; the prepared working liquid is added into the liquid tank, punched out with a pump and sprayed at the cutting part of the workpiece.

Engineer suggestion:

◇ Please clean the the liquid tank and the machine tool before  the first use of the product . It is recommended to use pure water or tap water to prepare the working liquid.

◇ It is strictly prohibited to use groundwater, too soft and hard water quality, please contact our company in advance to obtain technical support.

◇ The cutting fluid system should have a good aluminum scrap and impurity separation system to keep the working fluid pure and clean.

◇It is strictly forbidden to mix with other grades of cutting fluid to maintain its excellent characteristics.

Storage/Transportation/Package:

◇ It should be sealed and stored in a dry, cool and ventilated warehouse to prevent sun exposure, rain and impurities. The recommended storage temperature is 5~35℃.

◇ Use proper loading and unloading tools to avoid damage to the package.

◇ Cover with tarpaulin during transportation to prevent direct sunlight.

◇ Under normal storage conditions, the shelf life of the product is 2 year.

◇Specification: 18kg or 200kg.