发货地： 山东济宁
適用于各種航空航天用鋁合金、大部分鎂鋁合金等材質的加工。 該產品具有優異的防銹性、潤滑性、清洗性，抑菌性，金屬適用種類廣、使用周期長等特點。
超高性价比
三个工作日内发货
24小时在线技术服务
品名：壓鑄鋁微乳化切削液
型號：SGR2334
技術指標：
性能用途：
適用于各種航空航天用鋁合金、大部分鎂鋁合金等材質的加工。
產品特點：
該產品具有優異的防銹性、潤滑性、清洗性，抑菌性，金屬適用種類廣、使用周期長等特點。
使用方法：
①推薦一般使用濃度：原液與水按1:20使用。
②使用（更換）新液時，應先將貯液箱（槽）及機床工作臺、裝夾具、鐵屑及污物清洗干凈。
③槽液的補充：當槽液需要補充時，加水的同時加入相應比例的本品原液，保持必須的濃度。
④工作液應保持清潔和通風，及時清除金屬屑和浮油等雜質。
⑤禁止與其他品牌切削液混用。
包裝貯存：
①本品應貯存于干燥、陰涼通風庫房內，貯運過程中應避免日曬、雨淋。
②18L/桶、200L/桶或根據客戶需求。
安全防護：
操作時注意勞動保護，應避免與皮膚、眼睛等接觸，接觸后用大量清水沖洗。
Die-cast aluminum microemulsion cutting fluid SGR2334
Product Features：
◇SGR2334 is a micro-emulsion cutting fluid, suitable for most die-cast aluminum, aluminum alloy material processing.
◇SGR2334 has excellent lubricity, corrosion resistance, cleaning, antibacterial and other characteristics.
◇SGR2334 has passed the ROHS EU test and can meet the export requirements of the workpiece.
Product parameters：
Test items | Index | |
Concentrate | Appearance/（15~35℃） | Uniform transparent or translucent liquid |
Storage stability | No delamination, no phase change | |
Diluent （1:20） | pH | 8.5~9.5 |
Anti-corrosion test/ （55℃±2℃）（h） | Gray cast iron；grade A；not less than 48h | |
7 series aluminum, grade B, not less than 8h | ||
Rust resistance test | Single piece of cast iron qualified after 24h test | |
Cast iron lamination qualified after 8h test | ||
Defoaming property/（ml/10min） | ≤2 | |
Range of application:
◇SGR2334 is suitable for most die-casting aluminum, aluminum alloy material processing, including 6 series aluminum, 7 series aluminum milling, cutting, etc., especially can be used in aerospace and other materials processing and manufacturing.
Application method:
◇ After cleaning the liquid tank and the machine tool, the SGR2334 is mixed with water in a certain proportion according to the on-site process requirements; the prepared working liquid is added into the liquid tank, punched out with a pump and sprayed at the cutting part of the workpiece.
Engineer suggestion:
◇ Please clean the the liquid tank and the machine tool before the first use of the product . It is recommended to use pure water or tap water to prepare the working liquid.
◇ It is strictly prohibited to use groundwater, too soft and hard water quality, please contact our company in advance to obtain technical support.
◇ The cutting fluid system should have a good aluminum scrap and impurity separation system to keep the working fluid pure and clean.
◇It is strictly forbidden to mix with other grades of cutting fluid to maintain its excellent characteristics.
Storage/Transportation/Package:
◇ It should be sealed and stored in a dry, cool and ventilated warehouse to prevent sun exposure, rain and impurities. The recommended storage temperature is 5~35℃.
◇ Use proper loading and unloading tools to avoid damage to the package.
◇ Cover with tarpaulin during transportation to prevent direct sunlight.
◇ Under normal storage conditions, the shelf life of the product is 2 years.
◇ Specification: 20kg or 200kg.
Copyright © 2021.@欣格瑞（山东）环境科技有限公司 All rights reserved.
网站部分资源来源于网络，无法和版权者联系，无意侵犯，如有侵权请联系我们删除
备案号：魯ICP備09087608號
