品 名：消泡劑 

型 號：SGR1811 

產品簡介：結合電廠脫硫化學反應特點，本產品以丙三醇、環氧丙烷、環氧乙烷為主要原料，在催化劑存在下經高壓聚合而成，具有良好的消除泡沫能力和抑制泡沫能力，并具有良好的熱穩定性和化學穩定性。

理化指標：

應 用： 

消泡：取 1Kg 消泡劑兌 4Kg 水制成溶液，噴灑少量溶液至泡沫表面，泡沫立即消失。 

抑泡：甲方選定一臺機組吸收塔，向地坑內添加消泡劑（按照 350MW 機 組≤3 公斤，600MW 機組≤6 公斤的原則添加），觀察至少 12 小時吸收塔內的漿液無起泡現象。 

原理: 高鹽條件下，聚醚消泡劑通過改變泡沫表面張力來消除泡沫并抑制漿液起泡。 

包 裝：本品包裝為 25L、200L 塑桶。 

儲 存：本產品應存放于陰涼干燥的室內環境中，不得在高溫或嚴寒環 境中久置。

Defoamer SGR1811

Product name:Defoamer

Model: SGR1811

Product Data:

Product Introduction: This product belongs to the polyether defoamer, which is prepared by block polymerization reaction of propylene glycol or glycerol with propylene oxide, ethylene oxide, etc. under the action of catalyst.

Application: This product has a wide range of applications and strong versatility. It has good defoaming and antifoaming effects in biological fermentation, sewage treatment, pesticides and medicines, and chemical production.

Packaging: 25Kg, 50Kg, 100Kg plastic drum, 200Kg plastic-lined iron drum or negotiated packaging.

Storage: Suitable for storage at room temperature, do not place near heat sources, and do not expose to sunlight. Do not add acid, alkali, salt and other substances to the stored defoamer, and do not store it for a long time after dilution with water. There will be no stratification within half a year of storage. If stratification occurs after this period, it can be stirred evenly before use, which will not affect the use effect.