发货地: 山东济宁
廣泛用于造紙白水,化學清洗紡織、垃圾滲濾液、印染、 橡膠、制革等多種水系統消泡。污水處理中,不會堵塞滲透膜,無漂油等附著物造成不良影響。
品 名:消泡劑
型 號:SGR1821
產品簡介:該產品由聚醚酯、分散劑、穩定劑等組成,
理化指標:
應 用:
本品廣泛用于造紙白水,化學清洗紡織、垃圾滲濾液、印染、 橡膠、制革等多種水系統消泡。污水處理中,不會堵塞滲透膜,無漂油等附著物造成不良影響。
消泡:
當體系的泡沫形成后加入并攪勻便可立即消除泡沫,抑制泡沫再生。
抑制:
在體系未形成泡沫之前加入攪勻即可抑制泡沫的形成
用量:
具體用量根據試驗后來定。水質不同,起泡能力差距較大,廠家對液面要求也有不同,所以添加量會有較大差異。
使用方法:
可直接滴加或噴灑至污水中,也可根據實際情況稀釋 10-50 倍加入廢水中,稀釋后的消泡劑應盡快使用,否則會影響使用效果。
包 裝:
本品包裝為 25L、200L 塑桶。
儲 存:
本產品應存放于陰涼干燥的室內環境中,不得在高溫或嚴寒環境中久置。
Defoamer SGR1821
Product name: Defoamer
Model: SGR1821
Physico-chemical indicators:
Project | Technical indicators |
Appearance | Colorless or light yellow transparent oily viscous liquid |
pH value | 5.0-7.0 |
Viscosity | 300~600 mPa.s |
Product introduction: This product is widely used for defoaming in various water systems such as papermaking white water, chemical cleaning of textiles, garbage leachate, printing and dyeing, rubber, slag wastewater, high-temperature sewage, etc. In sewage treatment, it will not block the permeable membrane, and there will be no adverse effects caused by attachments such as floating oil.
Defoaming: Add it after the foam is formed in the system and stir it well to eliminate the foam immediately and inhibit the regeneration of foam.
Inhibition: Add it and stir well before foam is formed in the system to inhibit the formation of foam.
Dosage: The specific dosage will be determined based on the test. Different water quality has different foaming abilities, and manufacturers have different requirements for liquid levels, so the amount of addition will vary greatly.
Usage: It can be directly added or sprayed into the sewage, or diluted 10-50 times according to the actual situation and added into the wastewater. The diluted defoamer should be used as soon as possible, otherwise it will affect the use effect.
Packaging: This product is packaged in 25L or 200L plastic barrels.
Storage: This product should be stored in a cool and dry indoor environment and should not be placed in a high temperature or severe cold environment for a long time.